-
All New 4 Bolt Main Engine
-
9.6 to 1 Compression
-
Forged Steel Crankshaft
-
New Steel Beam Connecting
rods
-
Power Forged Pistons
-
Speed Pro Chrome Moly
Rings
-
Heavy Duty Double Roller
True Roller Timing Set
-
Aluminum fast burn
Edelbrock Oval Port Heads w/ 110cc Combustion Chambers
-
2.19/1.88 stainless steel
valves, hardened valve locks, chrome moly retainers, Heavy Duty Valve
Springs and Screw in Studs
-
Custom Hyd. Roller
Camshaft Duration @ 050 211/230, Lift 510/540
-
Hardened Seats for
running Unleaded fuel
-
Hydraulic Roller Lifters
-
Federal Mogul Tri-Metal
Bearings
-
Black Oxide Coated
pushrods
-
New 1.7 Ratio Rocker Arms
-
Melling High Volume Oil
pump
-
Complete Fel-pro Gasket
set
-
New GM Harmonic Balancer
-
New Flexplate for
Automatic Trans. (Standard Flywheel extra $ 250.00 )
-
New Oil pan, Timing cover
and Baffled Valve Covers
|
-
Edelbrock Dual Plane Port
Matched Intake Manifold # 7164
-
4 Barrel Edelbrock 800cfm
Carburetor # 1813
-
New High Flow Water pump
-
New Fuel Pump
-
Race Prepped High Energy
Ignition Distributor w/ 53,000 volt coil Pak
-
New Champion Spark plugs
gapped and installed
-
8mm High Temp Resistant
Silicone Wires
-
New Chrome Thermostat
Housing
-
14 Inch Chrome Air
Cleaner
-
PCV and Breather
Installed
-
New Fuel Lines and Gas
Filter
-
Oil Filter, Dipstick and
Diptube
-
Ignition Timing Set,
Carburetor fully adjusted
-
Hot Run tested and dialed
In place
-
Free 40 minute installation DVD
-
Painted with a High
Temperature Enamel Paint
-
Packaged and Crated for
Shipment
|
